An féidir an ghloine ciseal dúbailte a phriontáil le patrún?

More and more people like to use double-layer glass, because it is not only very beautiful and transparent, but also very convenient to use, and also think that the double-layer structure is stronger, anti-drop, and heat-insulating. And some people will also customize their favorite styles, plus their favorite patterns, it is difficult to put down. At this time, many people will ask, can the design be printed on the glass? I can tell you it's okay.

Tá go leor bealaí ann chun patrún a phriontáil ar ghloine dhúbailte gloine: códú léasair, gluing, aistriú teirmeach, etc. Mar sin féin, ar an dá bhealach, agus spéaclaí patrún á n-úsáid agat, bí ar an eolas faoi:

1. For the cleaning of cups, double-layer glasses should be cleaned at least once a day. When cleaning the cup, it is not only necessary to clean the mouth, bottom and walls of the cup, especially the bottom of the cup. If you don't clean your cups often, you can deposit and accumulate a lot of bacteria and dirt. If cleaning takes up a lot of dust, you can squeeze toothpaste on the brush and brush back and forth in the cup.

2. Do not use too much warm water. The patterns on the cups are all printed using printing technology. So if the cup is diathermic, you can't use too much water. However, after a while, the custom patterns don't look as good as they used to be.

3. Seachain nochtadh do sholas na gréine. Más mian leat do tumbler dúbailte saincheaptha fanacht chomh geal le nua ar feadh i bhfad, é a choinneáil amach as an ghrian. Toisc gur féidir le radaíocht láidir solas na gréine an cupán a dhathú.

Therefore, when a customized double-layer glass with an exclusive pattern is available, be sure to pay attention to future use to avoid certain damage to the printed pattern. At the same time, the patterns of each printing method are different, and the printing quality is also different. Therefore, if you want to keep the pattern for a long time, you must indicate your needs to the manufacturer, so that the manufacturer can make the glass more in line with the user's requirements.